How to install Anti Slip Tape? anti slip tape is an anti-slip product that is often seen and used in daily life. After buying, many people make mistakes in installing process, which directly leads to the reduction of the service life of the anti slip Tape, or the problem of edge warping and so on. Therefore, the pasting method of anti slip tape is a crucial link. Today, let's introduce the application method of anti slip tape. 1). Clean the dust, dirt and water from the surface of the area which need to be pasted. Let the surface become completely clean dry. 2). Measure the length of the tape you need to use, then cut it by knife or scissors. 3). Cut the corners of the tape to round shape, this step is very important, which can increase the service life of the tape. The corners will not cock easily. 4). Tear off a bottom paper at the head of the anti slip tape, fix the starting point of the pasted object, gradually tear off the bottom paper, and pave the anti slip tape on the surface of the pasted object. 5). Use a roller or your hand to press everywhere of the tape, drive the air out and make sure the tape is tightly adhered to the surface. 6). If the temperature is below -20 degree C, use a hairdryer to heat the tape, it`s good for curing the adhesive. 7). If possible, use a rubber hammer to beat the tape slightly, double confirming that the tape is tightly fixed. 8). Don`t move or wet the tape within 24 hours. Then the tape will be strong and durable enough.
